MTS Insight - 1kN to 300kN - Manual (Page 14)

Insight Material Testing System
EC Declaration of Conformity
Preface 14
MTS Insight 150 kN to 300 kN
Description of Models MTS Insight Material Testing System 150kN, 200 kN and 300 kN. This
includes the following sub-systems of the machine: Frame, Motor,
Amplifier, Controller, Handset and Cables (guard is customer option).
Manufacturer MTS Systems Corporation
14000 Technology Drive
Eden Prairie, MN, USA 55344-2290
Phone: 952-937-4000
Directives
Low Voltage directive 73/23/EEC, the EMC directive 89/336/EEC and the
Machinery Safety Directive 98/37/EC.
Standards
EN 61010-1: Safety requirements for electrical equipment for measurement,
control and laboratory use, Part 1: General requirements
EN 61326-1: Electrical equipment for measurement, control and laboratory
use EMC requirements Part 1: General requirements.
EN 55011: Specification for limits and methods of measurement of radio
disturbance characteristics of industrial, scientific and medical (ISM) radio
frequency equipment (1991). Group 1, class A (non-domestic where RF is
NOT used in the treatment of material).
Surge immunity test EN 61000-4-5 0.5 kV line to line
1 kV line to ground
Radio frequency common mode, amplitude
modulated EN 61000-4-6 3 V (rms)
Power frequency magnetic field EN 61000-4-8 30 A (rms)/m
Voltage dips, short interruptions and voltage
variations EN 61000-4-11 1 cycle/100%
Radiated emissions EN 55011
Conducted emissions EN 55011
Description Basic Standard Test specification