MTS Insight - 1kN to 300kN - Manual (Page 59)

Main Power Switch (I/O) and E-Stop
Insight Material Testing System Operation 59
Main Power Switch (I/O) and E-Stop
The main power switch for the machine is on the base of the frame.
The frame is also equipped with an Emergency Stop button. The
Emergency Stop will cut the power to the motor and should be used for
emergency purposes only.
To shut down the motor power and stop the test program, press the
Emergency Stop button. Twist the switch clockwise to release it. Use the
Emergency Stop button to shut down your test if something unexpected
should happen.
1 - 2 kN 2 EL HS and
5 - 50 kN 100 - 300 kN
Main power and
E-Stop Switches