Specifications–model 494.06 chassis – MTS Landmark Testing Systems User Manual
Page 24
Landmark Test System Site Prep Guide
24
Controller Specifications
System Component Specifications
Specifications–Model 494.06 Chassis
All equipment related to the controller should be connected to the same fused
power circuit.
Note
Electrical connections must be made by qualified personnel and conform
to local codes and regulations. Local electrical codes supersede any
information found here.
Model 494.06 Chassis Specifications
Parameter
Specification
Input Voltage
100–240 V AC (single phase)
power factor corrected universal input
Input Frequency
50–60 Hz
Input Current
10 A at 100 V AC
5 A at 240 V AC
Facility Power Requirements
Provide a dedicated circuit for the
chassis, computer, and monitor.
Input Surge
<40 A
Insulation Over Voltage
Category I
Pollution Degree
2
Weight
Approximately 14 kg (31 lb)
Dimensions
Width: 21.6 cm (8.5 in)
Height: 44.2 cm (17.4 in)
Depth: 64.8 cm (25.5 in)