MTS Landmark Testing Systems - Manual (Page 5)

Landmark Test System Site Prep Guide Introduction 5
Introduction
The MTS Landmark System is designed to operate in a laboratory or light
industry environment. To get the maximum intended use of the system, it is
recommended that careful consideration be given to planning its installation.
This includes:
• Considerations of the types of testing that will be performed
• The building facilities requirements for power, cooling water, air
conditioning, ceiling height, floor loading, and so on
• Contract services, such as riggers and moving equipment, to transport the
system components within the facility
• Support personnel that might be required during installation of the system
Each test application has its own requirements in addition to the test system
requirements. Therefore, it is recommended that overall planning be considered
as early as possible. Preparation for and setup of the major system components is
your responsibility. This guide will help answer most of your questions about the
physical characteristics and requirements of your system.