Ion, see, Crosshead method – MTS Criterion Series 40 User Manual
Page 40
MTS Criterion
®
Series 40 Site Preparation Guide
40
Moving C43 (30 kN, 50 kN) and C44 Frames
Lift and Move Instructions
7. Before placing the frame in its operating location, you must insert the
leveling feet into each corner of the base. The shipping skid must be
removed to insert the feet and before placing the frame in its operating
location. Remove the shipping skid, insert the leveling feet, and position the
frame. Follow the instructions described under
When the frame is in its operating location, you can proceed with the installation
process.
Lifting the Frame from the Base
Crosshead method
This method requires protective padding on either the crosshead or forklift arms
to protect the crosshead from scratching or marring.
This method can be used to:
•
Transport the load frame to the site location.
•
Lift a tabletop load frame onto a table or workbench.
•
Lift the frame to remove the transport skid from the frame’s base and to
insert the leveling feet.
Load Frame
Shipping Bolt
Shipping Skid
Forklift Arm