MTS Landmark TWX User Manual
Page 114
Advertising
1. Check current displacement limits.
a) In the Station Manager application main window, select Display > Station Setup > Displacement
> Channel Input Signals.
b) Click the Limits tab.
c) Check the current upper and lower limit settings to identify the acceptable displacement range for
the actuator. Adjust the limits if necessary.
2. Set Manual Command to Displacement.
a) In the Station Manager application main window, click the Manual Command button.
b) Ensure that Exclusive Control is checked.
c) In the Manual Controls window, select a Control Mode of Displacement.
d) Ensure that Enable Manual Command is checked.
3. Reset/Override the Interlock.
114 | MTS Landmark Test System Operation
Running the Example Tension Test
Advertising