Purenex Multipure Aquaversa for model MP750SB - Manual (Page 5)

The Models MP750SB, MP750SI, and MP1200EL Drinking Water Systems are designed for use below the sink and can
easily be installed on the incoming cold water line. The MP750SB and MP1200EL units are connected to a specially
designed stainless steel faucet (spigot) which installs directly on your sink, requiring little space. Your below sink unit is
shipped with only one installation kit consisting of the accessories and fittings deemed appropriate for your area. Alternate
accessories may be purchased at a minimal cost.
The Multi-Pure Model MP750SI includes the housing, filter, and adapters; no installation fixtures or accessories are provid-
ed. MP750SI is appropriate for an in-line installation and can be used with your existing faucet. It is recommended that
the inline model be installed by a professional plumber in accordance with established plumbing procedures.
Model MP750SB
Required Tool List
The following tools are required to install your below sink Multi-Pure
Drinking Water System:
Installation of Faucet/Spigot (Ceramic/Porcelain Sink):
- 3/8" Reversible Electric Drill
- 7/16" (or 1/2”) high speed steel drill bit
- ½" carbide tipped masonry drill bit
- Hammer
- Center punch
- 8" adjustable wrench
- Pliers or Vise Grips
Installation of Faucet/Spigot (Stainless Steel Sink):
- all of the above (except masonry drill bit), plus…..
- 1/8” high speed drill bit
Adapta Valve Installation:
- 8" adjustable wrench
- Wire Cutter or Knife
Installation of MP1200EL Capacity Monitor:
- (see tool list in Section II.C)
5
I.D. Below the Sink Installations
Multi-Pure 90-Day Guarantee: Multi-Pure demonstrates its confidence in the performance of its Drinking Water
Systems by offering its 90 day money-back guarantee. If you should find the Drinking Water System unsatisfactory, let
us know within 90 days of purchase, and we will promptly exchange it or refund your money.
Multi-Pure Warranty: Multi-Pure Corporation warrants to the original retail customer its Drinking Water Systems and
components to be free of defects in material and workmanship for use under normal care, and will repair or replace any
System at no charge (excluding transportation to Multi-Pure headquarters) to the customer during the warranty period.
The Drinking Water System housings are warranted for a lifetime (provided that filter has been changed at least once per
year); all exterior hoses and attachments to the System are also warranted for defects in material and workmanship for
one year.
Multi-Pure Solid Carbon Block Filters are warranted for defects in material and workmanship for use under normal care.
The capacity of the filter cartridge depends upon the amount of impurities in the water to be processed. For optimum
performance, it is essential that the Solid Carbon Block Filter cartridge be replaced annually or when it has processed its
listed capacity, whichever comes first.
Except as otherwise expressly provided above, Multi-Pure Corporation makes no warranties, express or implied, arising
by law or otherwise, including without limitation the implied warranties of merchantability and fitness for a particular pur-
pose, to any person. This limited warranty may not be altered, varied or extended except by a written instrument execut-
ed by Multi-Pure Corporation. The remedy of repair or replacement as provided under this limited warranty is exclusive.
In no event shall Multi-Pure Corporation be liable for any consequential or incidental damages to any person whether
occasioned by negligence of the manufacturer, including without limitation damages of loss of use, cost of substitution,
property damage, or other monetary loss.
I.C. W a r r a n t y