Juki HZL-35Z - Manual (Page 28)

28
USING AUTOMATIC NEEDLE THREADER
Raise the needle to its highest position by rotating the
hand wheel towards you.
1. Hook thread to thread guide as illustrated.
2. Pull down lever holding the end of thread.
3. Turn the lever as far as it will go.
4. Guide thread into hooked end and pull it upward.
5. Return the lever and needle will be threaded
automatically.
6. Release the lever and pull thread away from you.
NOTE:
For smooth threading it is recommended to set the
machine at straight stitching (center position) when using
needle threader.
1
2
3
5
4
6