Juki HZL-35Z - Manual (Page 68)

68
3. CARING FOR YOUR MACHINE
CLEANING THE FEED DOGS AND SHUTTLE AREA
Always disconnect the machine from power supply by removing the plug from the socket-outlet. CAUTION
To ensure the best possible operation of your machine, it
is necessary to keep the essential parts clean at all times.
1. Raise the needle to its highest position.
2. Remove the needle plate.
3. Remove the bobbin case.
4. Clean the feed dogs and shuttle area with the lint
brush.
NOTE : Put a drop of sewing machine oil on the
shuttle race as indicated by the arrows.
5. Replace the bobbin case with the projection positioned
against the spring. Replace the needle plate.
Bobbin case
Cápsula
Needle plate
Placa aguja
Bobbin case
Cápsula
1
2
3
4
5
Projection
Resalte
Spring
Muell