Multiquip CS403030 - Manual (Page 10)

PAGE 10 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)
)
HAZARD SYMBOLS
Engine exhaust gases contain harmful toxins
and will displace oxygen when running in an
enclosed or confined area. NEVER operate
this equipment in a confined area or enclosed
structure that does not provide ample free flow
air.
Explosive Fuel
Lethal Exhaust Gases
Burn Hazards
Engine components can generate extreme heat.
To prevent burns, DO NOT touch these areas
while the engine is running or immediately after
operations. NEVER operate the engine with
heat shields or heat guards removed.
Rotating Parts
NEVER operate equipment with covers, or
guards removed. Keep
fingers, hands , hair
and clothing away from all moving parts to
prevent injury.
Safety precautions should be followed at all times when
operating this equipment. Failure to read, understand and
comply with the Safety Messages and Operating Instructions
could result in injury to yourself and others.
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!
This Operation Manual has been
developed to provide instructions for the
safe and efficient operation of the STOW
CS4030 Saw . For engine maintenance
information, please refer to the engine
manufacturer's instructions for data relative
to its safe operation.
Before using this Saw, ensure that the operating individual
has read, understands, and complies with all instructions
in this manual.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure to
the operator, and are preceded by one of three words: DANGER,
WARNING, or CAUTION.
You WILL be KILLED or SERIOUSLY INJURED
if you DO NOT follow these directions.
You CAN be KILLED or SERIOUSLY INJURED if
you DO NOT follow these directions.
You CAN be INJURED if you DO NOT follow
these directions.
CAUTI CAUTI CAUTI CAUTI CAUTION
DANGER DANGER DANGER DANGER DANGER
WARNING WARNING WARNING WARNING WARNING
Potential hazards associated with Saw operation will be
referenced with Hazard Symbols which appear throughout this
manual, and will be referenced in conjunction with Safety
Message Alert Symbols.
SAFETY MESSAGE ALERT SYMBOLS
Diesel fuel is flammable, and its vapors can
cause an explosion if ignited. DO NOT start
the engine near spilled fuel or combustible
fluids. DO NOT fill the fuel tank while the
engine is running or hot. DO NOT overfill
tank, since spilled fuel could ignite if it comes
into contact with hot engine parts or sparks
from the ignition system. Store fuel in
approved containers, in well-ventilated areas
and away from sparks and flames. NEVER
use fuel as a cleaning agent.
NEVER use your hand to find hydraulic leaks.
Use a piece of wood or cardboard. Hydraulic
fluid injected into the skin must be treated by a
knowledgable physician immediately or severe
injury or death can occur.
Skin Injection Hazard