Opticon H15 User Manual User Manual
Page 41
Opticon
H15
User Manual
2-34
d) Diags
Tab
Figure 2-16. Diags tab
• (Re)connect: Disable and enable the radio, apply or reapply the current
profile, and attempt to associate and authenticate to the wireless LAN,
logging all activity in the output area at the bottom.
• Release/Renew: Obtain a new IP address through DHCP release/renew,
and log all activity in the output area at the bottom.
• Start Ping: Start a continuous ping to the address in the edit box next to it.
Make sure the terminal is (rec)connected. Once the button is clicked, its
name and function will change to Stop Ping. Moving to an SCU window
other than Status or Diags also will stop the ping. Pings will continue until
you tap the Stop Ping button, move to an SCU window other than Diags or
Status, exit SCU, or remove the radio.
• Diagnostics: Attempt to (re)connect to an AP, and provide a more
thorough dump of data than is obtained with (Re)connect. The dump will
include radio state, profile settings, global settings, and a BSSID list of APs
in the area.
• Save To...: Save the diagnostics output to a file.