Opticon H21 - Manual (Page 76)

76
5.3. Sending e-mail
Before you set up your e-mail account, please prepare the following information:
Item Description
User name The username for the new email account. This is usually
the first part of your email address, which appears before
the “at” sign (@).
Password The password for the new email account. You can save
your password, so that you do not need to enter it each
time you connect to your e-mail server.
Domain name The domain name may be required.
Server type The type of email server that hosts your mailbox (POP3
or IMAP4).
Account name An account name. You must use a unique name for each
account that you set up.
Network The type of network your email server connects to.
Incoming mail server The name of your email server (POP3 or IMAP4).
Require SSL connection Ensures that received email for this account uses an SSL
connection.
NOTE: If you select this and your ISP does not support an
SSL connection, you will not be able to connect to receive
e-mail.
Outgoing mail server The name of your outgoing email server (SMTP).
Outgoing server required
authentication Your outgoing email server (SMTP) may require
authentication.
NOTE: Your user name and password from above will be
used.
Outgoing sever settings Your outgoing email server may require different
authentication settings than your incoming e-mail server.
Different user name for outgoing
server An option that allows you to enter separate settings for
your outgoing email server.
User name Your outgoing email server user name.
Password Your outgoing email server password.
Domain name The outgoing email server domain name.
Require SSL connection (outgoing
mail server only) Enables you to send personal information more securely.
NOTE: If you select this and your ISP does not support an
SSL connection, you will not be able to send email.
5.3.1.
Setting up an email account:
1. Tap > E-mail > Setup E-mail.
2. Enter your e-mail address.
3. Select the check box next to Try to get e-mail settings automatically from the Internet and
tap Next. (See picture below left)
4. After Auto Setup has successfully entered your servers settings, tap Next. (See picture below
right)