Opticon H21 - Manual (Page 93)

93
8. Bluetooth
This chapter instructs you how to set up a Bluetooth connection for sending information over a
WPAN or Wireless Personal Area Network.
8.1. Bluetooth Modes
There are three Bluetooth operational modes:
On Bluetooth is enabled and your device can send and receive information with other
Bluetooth devices in range.
Off Bluetooth is disabled and can neither send nor receive information.
Visible Bluetooth is enabled and visible to all other Bluetooth devices in range.
8.2. Enabling Bluetooth
1. Tap > Settings > Bluetooth > Mode.
2. Select the check box in front of Turn on Bluetooth as shown below left.
3. Tap OK to save and exit.
8.3. Making Your Device Visible
To allow other Bluetooth devices to detect your device and send you information, follow these steps:
1. Tap > Settings > Bluetooth > Mode.
2. Select the check box in front of Make this device visible to other devices as shown above right.
3. Tap OK to save and exit.