Pairing with devices in range – Opticon H21 User Manual
Page 94
94
8.4. Pairing With Devices in Range
Pairing with another Bluetooth device allows you to exchange information in a secure manner. Make
sure the two devices are within a range of 10 meters, and Bluetooth is turned on and in visible mode.
1. Tap >Settings > Bluetooth > Devices.
2. Tap Add new device.
A list of Bluetooth enabled devices within range displays on screen.
3. Select the device to connect to and tap Next as shown below left..
4. For a more secure connection, enter a passcode as shown in the picture below in the middle.
The same passcode must be entered on the other device. If you do not want to use a passcode,
tap Next.
If the connection is successful, a Device Added confirmation message displays on screen.
5. Select the service to use from the other device. (See the picture on the right)
6. Tap Save.