Button sewing – Brother XL5020 User Manual
Page 62
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
54
Button Sewing
XL5030 XL5020 XL5010
Pattern
Stitch Length
Foot
4, 5, 6
4, 5, 6 2, 3, 4 Zigzag Stitch
Any
Button
Sewing Foot
1. Measure the distance between the holes and select the appropriate
pattern with the pattern selection dial.
Distance between holes
Pattern
1.7 mm (1/16")
4
4
2
3.5 mm (9/64")
5
5
3
5 mm (13/64")
6
6
4
XL5030
XL5020
XL5010
2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.
(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)
4. Place a button between the foot and the fabric and make sure that
the needle enters the holes without hitting the button. If it hits, see
step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
threads and tie the two threads at the back of the fabric.