Buttonhole fine adjustment – Brother XL5020 User Manual
Page 60
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
52
Buttonhole Fine Adjustment
If the stitching on the two sides of the buttonhole do not appear iden-
tical, the following adjustments can be made.
1. Set the Stitch Length Dial to “ ” and sew the buttonhole on a scrap
of fabric while observing how the material is fed.
2. If the right side of the buttonhole is too coarse or fine, adjust the
feeding of the material with the Stitch Length Dial.
1 Right side
2 Stitch length
3 Shorter
4 Longer
5 In this case
3. After obtaining a satisfactory feeding on the right side, stitch the
buttonhole and observe the feeding.
4. If the left side is too coarse or fine compared to the right side, adjust
the buttonhole fine adjustment screw as described below.
If the left side is too coarse, turn the screw with the enclosed screw-
driver in the – direction. If the left side is too fine, turn the screw with
the enclosed screwdriver in the + direction.
This adjustment allows both sides of the buttonhole to appear identi-
cal.
6 Stitch length dial
7 Buttonhole fine adjustment screw
8 Left side
9 In this case
5
5
1
2
3
4
8
9
9
–
0
3
4
2
1
•
•
•
•
+
–
0
3
4
2
1
•
•
•
•
+
–
0
3
4
2
1
•
•
•
•
+
6
7
SS
SS
SS