Charging and power supply – Opticon PHL 5300 Quickstart Guide User Manual

Page 10

Advertising
background image

8

Charging and Power Supply

y

Please note carefully!

Manufacturer’s Instructions: Don’t recharge the battery under a

temperature higher than 45 ºC and don’t store or use it under a temperature

higher than 60 ºC; otherwise, expansion or leakage of the battery may

occur.

1. Unlock main battery lock and releast the main battery. (If you just unpack

the package, please omit this step. Main battery and Pocket PC are packed
separately when Pocket PC was shipped.)

2. Use stylus to set back-up power switch on the back of the device to be On.

Remind you that, you only need to turn on back-up power switch when
you use this device for the first time. You will not need to touch this
switch again in any other situations.

3. Install main battery and lock the main battery lock.

Power jack

Advertising
This manual is related to the following products: