Opticon PHL 5300 Quickstart Guide - Manual (Page 13)

11
Reboot
V Warm-boot (Reset): Use the tip of stylus to press down the “Reset”
button located in the left side of Pocket PC.
V Cold-boot: Use one finger to press and hold the “Power” button on the top
of the Pocket PC, meanwhile, use the tip of the stylus to press down the
“Reset” button located on the left side of the Pocket PC. Then release the
“Power” button and the “Reset” button simultaneously. After rebooting,
follow the instructions on the screen to finish screen alignment…etc, tasks.