Opticon PHL 5300 Quickstart Guide - Manual (Page 18)

16
3. Create Bonds to Device
v Tap Bonded Devices tab
n Tap on “New” and the sytem will start
searching for any Bluetooth device.
o Tap on the bonded name, which will have
the reverse attribute, and then tap on
“Next.”
p Enter Device PIN and tap on “Next.”
Enter the same PIN for the two specified
bonded devices.
q As far as the bonded end agrees, you will
be on the list of bonded devices.
r Follow the rest of the instructions given on
the screen to create a new bond to the
device.
s Tap and hold the created device name to
execute related functions such as Rename
or Delete, etc.