Orbit Baby Generation-one Toddler Car Seat - Manual (Page 43)

84
84
Securing Y
our Child
Securing Y
our Child
85
85
84
84
Securing Y
our Child
3. Adjusting the fi t of the Crotch Belt
The Crotch Buckle itself cannot be
lengthened on its strap. It should fi t snugly
and comfortably on your child and can be
moved forward as your child grows:
Adjusting the Restraint Harness to Fit
Your Child cont’d
a) Remove your child from the carseat.
b) Remove the Crotch Pad from the
Crotch Belt.
c) Open the Upholstery Lower Panel (Photo
K).
d) Feed the Crotch Buckle down through
the Upholstery (Photo L).
e) Open the Front Access Panel
underneath the carseat (Photo M).
f) Find the metal plate under the shell that
secures the crotch belt in its slot.
g) To remove the Crotch Buckle, turn
the metal plate vertical and feed it up
through the shell (Photo N).
c) If the Shoulder Straps of the Restraint
Harness are still too tight after loosening
them all the way, they can be lengthened
by using the alternate Strap Loops on
the Splitter Plate: Access the Splitter
Plate by following steps 1a) through 1c)
on page 82. Use either loop setting as
shown in the guide below.
K
L
M
N
O
P
Front
Access
Panel
metal plate
Crotch Buckle
Loop A:
shorter
strap for
smaller
children
Loop B:
longer
strap for
larger
children