Orbit Baby Generation-one Toddler Car Seat - Manual (Page 47)

92
92
T
raveling with Y
our T
oddler Car Seat
Docking the Toddler Car Seat
1. Lock the parking brakes on both wheels
of the Orbit Stroller. Make sure nothing
is obstructing the Stroller’s SmartHub.
2. Grasp the sides of the Toddler Car Seat
fi rmly by the front and side (Photo C).
3. Press the Toddler Car Seat fi rmly onto
the SmartHub of the Stroller until you
feel and hear a CLICK (Photo D).
4. CHECK the security of the docking by
pulling up on the carseat.
5. Rotate the Toddler Car Seat on the
Stroller until it clicks into one of the four
locking positions (listen for a CLICK).
Undocking and Removing the Seat
1. Lock the parking brakes on both wheels
of the Orbit Stroller.
2. Lift the carseat while squeezing one or
both Release Levers (Photo E).
Using the Toddler Car Seat on the Orbit
Stroller cont’d
93
T
raveling with Y
our T
oddler Car Seat
93
Only rotate the Toddler Car Seat when the Stroller is stationary and the
wheel brakes are locked.
Always fully support the carseat by fi rmly grasping it with both hands.
To ensure full support, grasp the Toddler Car Seat with one hand on the side
rim and the other on the opposite side of the front rim.
Always make sure that the seat is locked in Forward- or Rear-Facing
position before strolling. Side-facing positions are for stationary use only.
PINCH HAZARD: Make sure all fi ngers are free of the Release Levers.
1. Pull one or both Release Levers.
2. Rotate the Toddler Car Seat and let go of the Release Levers. The Toddler
Car Seat will lock into the next rotational stop position (Photo D).
Rotating the Toddler Car Seat
! WARNING !
Note: The Toddler Car Seat will not rotate on the Stroller when the
Braces are installed. To restore full rotation on the Orbit Stroller,
remove the Braces and store them in the Cargo Pod. The Braces
can be removed while the Toddler Car Seat is docked on the Stroller.
C
D
E