MacDon 4000 Mower Conditioner - Manual (Page 10)

10
SPECIFICATIONS
CONDITIONER ROLLS 9 FT. MOWER CONDITIONER
Drive Type Gear driven through telescoping u-joints
Roll Type Helical intermeshing fabric reinforced rubber
Or
Helical intermeshing steel
Roll Diameter Rubber: 9.5 in (242 mm) Steel: 10.0 in (254 mm)
Roll Length 105.8 in (2687 mm)
Roll Speed 729 rpm
WHEELS
Tread Width 100 in (2540 mm)
Tires 9.5L – 14 I1 Rib Implement
Tire Pressure 20 psi (138 kPa)
MATERIAL DISCHARGE
Minimum Width 33.3 in (845 mm)
Maximum Width 84.9 in (2156 mm) (wider in heavy crop)
Number of Width Settings 7
OPERATING SPEED
Range up to 8 mph (13 Km/h)
Recommended Speed for Most Conditions 5 mph (8 Km/h)
TRACTOR REQUIREMENTS
Minimum Power 35 hp (26 kW)
Minimum Weight 5000 lbs. (2268 kg)
PTO 540 rpm with ASAE Standard location
Drawbar Clevis or straight, ASAE Standard hitch location
Hydraulics:
Type Two double acting remote circuits
Minimum Pressure 1350 psi (9300 kPa)
(SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT
NOTICE OR OBLIGATION TO REVISE UNITS PREVIOUSLY SOLD.)