MacDon 4000 Mower Conditioner - Manual (Page 59)

59
MAINTENANCE/SERVICE
MAINTENANCE SCHEDULE
AT FIRST USE: See "Preparing the Mower Conditioner" and "Break-In Period" in Operation section.
10 HOURS OR DAILY
1. Grease telescoping driveline.
2. Grease fixed driveline.
3. Grease upper roll universal shaft.
4. Grease lower roll universal shaft.
5. Grease reel drive universal shaft.
6. Check hydraulic hoses for leaks.
7. Oil knife (except in sandy conditions).
8. Check knife sections, guards and clips.
9. Oil reel drive chain.
10. Check tire pressure
25 HOURS
1. Grease knife head.
50 HOURS
1. Grease roll shaft bearings.
2. Grease left and right saddle bearings.
3. Oil linkage ball joints (except in sandy conditions).
100 HOURS OR ANNUALLY *
1. Grease reel shaft bearing.
2. Grease wheel hub bearings.
3. Check main gearbox lubricant levels.
4. Check wobble box mounting bolt torques.
5. Check wobble box lubricant level.
6. Check wheel bolt torques.
*It is recommended that Annual Maintenance be done prior to start of operating season.
END OF SEASON: See "Storage Procedure" in Operation section.
1000 HOURS OR 3 YEARS
1. Change wobble box lubricant.