Maintenance/service – MacDon 4000 Mower Conditioner User Manual
Page 40
40
MAINTENANCE/SERVICE
GREASING THE MOWER CONDITIONER
See "Recommended Lubricants" in this section for
recommended greases.
The following greasing points are marked on the
machine by decals showing a grease gun (A), and
grease interval (B) in hours of operation. Log your
hours of operation and use the "Maintenance
Checklist" provided to keep a record of scheduled
maintenance.
Procedure:
1.
Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
2.
Inject grease through fitting with grease gun
until grease overflows fitting.
3.
Leave excess grease on fitting to keep out dirt.
4.
Replace any loose or broken fittings
immediately.
5.
If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
10 Hours or Daily
DANGER: Stay clear of drivelines
until all movement has stopped.
Entanglement with rotating driveline
will cause serious personal injury or
death. Avoid loose fitting or
dangling clothing.
1.
Telescoping Driveline (C) - three fittings.
2.
Fixed Driveline (D) - one fitting
SAMPLE GREASE DECAL
STAY CLEAR OF ROTATING DRIVELINES
TELESCOPING DRIVELINE
C
FIXED DRIVELINE
D