MacDon 4000 Mower Conditioner - Manual (Page 44)

44
MAINTENANCE/SERVICE
LINKAGE BALL JOINTS
Apply SAE 30 or equivalent lightweight oil to the
ball joints every 50 hours.
NOTE: Do not oil ball joints if operating in sandy
conditions. Oil will cause sand to adhere to joints,
causing excessive wear.
(A) Top center float link (2 joints)
(B) Right hand float link (2 joints)
(C) Left hand float link (2 joints)
(D) Spring pivot (2 joints)
OIL R/H LINK
B
OIL CENTER LINK
A
OIL L/H LINK
C
OIL SPRING PIVOTS
D