MacDon 4000 Mower Conditioner - Manual (Page 37)

37
OPERATION
STORAGE PROCEDURE:
Do the following at the end of each operating
season:
CAUTION:
1. Clean the mower conditioner thoroughly.
Never use gasoline, naphtha or any volatile
material for cleaning purposes. These
materials may be toxic and/or flammable.
2. Cover cutterbar and knife guards to
prevent injury from accidental contact.
Also:
3. Store in a dry, protected place if possible. If
stored outside, always cover mower
conditioner with a waterproof canvas or other
protective material.
4. If possible, block up the mower conditioner to
take weight off tires.
5. Repaint all worn or chipped painted surfaces
to prevent rust.
6. Loosen both drive belts.
7. Lubricate the mower conditioner thoroughly,
leaving excess grease on fittings to keep
moisture out of bearings. Apply grease to
exposed threads and sliding surfaces of
components. Oil knife components to prevent
rust.
8. Check for worn components and repair.
9. Check for broken components and order
replacements from your dealer. Attention to
these items right away will save time and effort
at beginning of next season.
10. Replace or tighten any missing or loose
hardware. See Specifications section for
torque charts.