RaySafe i2 Dose Manager - Manual (Page 35)

35
RaySafe i2 dose manager user manual – Use dose manager
Figure 20. Dosimeter settings Dose tab
Dose tab – View the current accumulated dose for the dosimeter and reset dose Session 1 and 2. the action
reset dose Session is applied immediately and also exits the dialog.
4. wait for a few seconds before you remove the dosimeter from the cradle after you have saved the
changes.
ColleCt dAtA fRom doSImeteR
follow the instructions below to collect data from a dosimeter:
1. make sure that a cradle is connected to your computer’s USb port.
2. Insert a dosimeter in the cradle.
the computer will detect the dosimeter automatically and the dosimeter information will appear in dose
manager.