RaySafe i2 Dose Manager - Manual (Page 36)

36
RaySafe i2 dose manager user manual – Use dose manager
ColleCt dAtA fRom ReAl tIme dISPlAy
follow the instructions below to collect data from one or several real time displays in your local network:
1
3
4
5
2
Figure 21. Collect data from real time display
1. Click the button manage in the Home toolbar.
2. Select find real time displays and wait while dose manager is searching for real time displays in your
network.
3. Select a real time display and click Select.
4. Check the box Include in synchronization and click ok.
5. Click the button Synchronize.
the dosimeter information will appear in dose manager.
finding real time displays on a local network might not be possible due to the network configuration. If you
cannot find a real time display that is installed on your local network it can also be added to the list of real time
displays for dose manger using its network IP address. the IP address used by the real time display can be
found in its network setup menu.