Retsch BB 50 - Manual (Page 17)

Transport, scope of delivery, installation
17
2 Year of production
3 Part number
4 Serial number
5 Manufacturer’s address
6 CE marking
7 Disposal label
8 Bar code
9 Power version
10 Mains frequency
11 Capacity
12 Amperage
13 Number of fuses
14 Fuse type and fuse strength
In the case of questions please provide the device designation (1) or the part
number (3) and the serial number (4) of the device.
Pos : 7. 19 /0020 Übersc hrift en/1.1 Ü bersc hriften/ 1. 1 Ü berschrif ten BDA/11 Tr ans porthilf e entf ernen @ 0\ mod_1229076673566_9. doc x @ 5020 @ 2 @ 1
4.7
29B
Removing Transport Safeguards
Pos : 7. 20 /0005 RET SCH/ 0005 R ETSCH Bedienungsanlei tungen Kapit elsamml ung en/BB50/ 0006 Ver pac kung, Tr ansport und Aufs tellung/ 0005 BB50 Modul Trans port hilf e ent fer nen @ 5\ mod_1345721568835_9.doc x @ 34508 @ @ 1
Fig. 5: Carrying the machine - preparation
• Before installing the carry support, remove the hopper (B) and the
grinding room cover (P).
(see chapter Cleaning  removing the fill hopper / removing the splash-back
protection)
• Before carrying the machine, remove the bolt (G), the crusher arm
(R) and the drawer (E) to make the machine lighter.
(see chapter Servicing  replacing the breaking jaws)
B
R
E
P
G