Retsch BB 50 User Manual
Page 34
Advertising
Cleaning, wear and service
34
•
Simultaneously press the buttons RESET+START for 2 seconds.
The currently set operating time until calibration flashes in the gap width (F1)
display (default: 50h) and h is displayed in the speed (F2) display.
•
Briefly press the button (F4 +) to increase the operating time in increments of
10.
•
Briefly press the button (F4 -) to decrease the operating time in increments
of 10.
Fig. 33: Operating time until the calibration alert
Pos : 13.1 /0005 RET SCH/ 0005 R ETSCH Bedienungsanlei tungen Kapit elsamml ung en/------- Seitenumbr uch ----------- @ 0\ mod_1222344373758_0. doc x @ 2386 @ @ 1
F6
22.04.2014
14:23
Advertising