Retsch SM 200 - Manual (Page 15)

Transport, scope of delivery, installation
15
NOTE
Installation
–
Depending on the operating status of the mill, there may be slight
vibrations.
• Place the mill on an even, flat and balanced supporting surface only.
The supporting surface must be stable and must not vibrate.
Pos : 5. 30 /00004 Warnhinweis e/H 0002 HIN WEIS Aufs tell ung Z ugang G erätestec kdos e @ 0\ mod_1233836960983_9.doc @ 5820 @ @ 1
NOTICE
Installation of the machine
–
It must be possible to disconnet the machine from the mains at any time.
• Install the machine such that the connection for the mains cable is
easily accessible.
Pos : 6. 1 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/------- Seitenumbr uch ----------- @ 0\ mod_1222344373758_0.doc @ 2386 @ @ 1