Retsch AS 200 tap 30.025.0001 - Manual (Page 11)

08.01.2008 Retsch GmbH
11
Doc.Nr. D 98.025.9999
At higher atmospheric humidity the electrical and mechanical
components can become damaged and performance data are
changed to an unknown extent.
Installation height:
Max. 2000 m above sea level
Installation
Install the AS 200 tap only on a stable, safe subsurface.
Otherwise undesirable vibrations can be transmitted.
Alignment
To ensure that the AS 200 tap has a reliable standing position
all 4 feet must be in contact with the installation surface.
Electrical connection
Voltage and frequency for the AS 200 tap are given on the
type plate.
Ensure that these values correspond to the available
power supply system.
Connect the AS 200 tap to the power supply system using
the supplied connection cable.
Protection by external fusing is to be carried out when
connecting the mains cable to the power supply, according
to the regulations at the place of installation.
If the values on the type plate are not observed, this can
cause damage to the electrical and mechanical components.