Retsch AS 200 tap 30.025.0001 - Manual (Page 17)

08.01.2008 Retsch GmbH
17
Doc.Nr. D 98.025.9999
Removing the sieve stack
To remove the sieve stack lift this slightly, to-
gether with the lid, and at the same time press
the tapping arm upwards.
Withdraw the sieve stack forwards.
Switching off the TAP function
Pull out the stop bolt B and turn this. The tap-
ping arm A now locks into place when this is
lifted into the top position.
The AS 200 tap now works as a plane sieving ma-
chine.
B
A