Retsch AS 200 tap 30.025.0001 - Manual (Page 5)

08.01.2008 Retsch GmbH
5
Doc.Nr. D 98.025.9999
Safety instructions – summarised, part 1
Safety instructions
We exclude any claims for damages of any kind for injury to persons and damage to equipment
arising from non-observance of the following safety instructions.
Use according to the intended purpose
Do not make any alterations to the machine and use only spare parts and accessories approved by
Retsch.
Otherwise the Declaration of Conformity to the European Directives declared by Retsch will lose its
validity. Furthermore this will lead to loss of any kind of guarantee claims.
Packing
Please keep the packing material for the duration of the guarantee period, since if you have a complaint
and the equipment is returned in inadequate packing your guarantee claim is at risk.
Transport
The AS 200 tap must not be knocked, shaken or thrown during transport. Otherwise the electronic and
mechanical components can be damaged.
Temperature variations
If the AS 200 tap is subjected to high temperature variations (e.g. during air transport) it must be pro-
tected against condensed water. Otherwise there may be damage to the electronic components.
Supplied items
If the supplied items are incomplete and/or there is transport damage you must inform the transporter and
Retsch GmbH immediately (within 24 hrs). Later complaints may possibly be no longer considered.
Ambient temperature:
If the temperature drops below or exceeds ambient temperature the electrical and mechanical components
can become damaged and performance data can change to an unknown extent.
Atmospheric humidity:
At high atmospheric humidity the electrical and mechanical components can become damaged and per-
formance data can change to an unknown extent.
Installation:
In order to ensure reliable operation the AS 200 tap must be doweled firmly to the subsurface by means of
the transport angle piece.
Electrical connection / connecting to the mains supply
If the values given on the type plate are not observed the electrical and mechanical components
can become damaged.