Retsch AS 200 tap 30.025.1001 - Manual (Page 20)

8 January 2008 Retsch GmbH
20
Doc. no. D 98.025.9999
General Points
Cleaning
We recommend Retsch ultrasonic baths for a thorough but
gentle time-saving cleaning of your analytical sieves.
Please ask for our special leaflet on the “Care and Cleaning
of Analytical Sieves“, which is available free of charge.
The AS 200 tap may not be cleaned with running water.
Risk of a fatal electric shock.
Use only a cloth moistened with water.
Solvents are not permitted.
Maintenance
Otherwise the AS 200 tap is essentially maintenance-free.
Safety instructions (table) For the AS 200 tap from the various
chapters
Process Occurrence Risks
Safety Damage to equipment and injury to
people due to a non-observance of
the safety instructions Rules out all kinds of claims for
compensation.
Packaging Please keep the packaging for the
duration of the guarantee period. Returning the equipment in unsuitable
packaging if you have a complaint can
jeopardize your guarantee claims.
Transport The AS 200 tap may not be
knocked, shaken or thrown about
during transport
.
Electronic and mechanical components
can become damaged.
Temperature fluctuations Protect the AS 200 tap from
condensation if it is subjected to a
high level of fluctuations
Electronic components can become
damaged.
Installation The AS 200 tap may only be set up
on a suitable laboratory table. The movement of the sieved material
can cause considerable imbalance.
Scope of supply If the shipment is incomplete and /
or has been damaged during
transport, you must notify the
forwarder
and Retsch GmbH
immediately (within 24 hours).
Complaints lodged at a later date
might not be considered valid.
Ambient temperature lower than 5°C
higher than 40°C
Electronic and mechanical components
can become damaged.
Performance data can change to an
unknown extent
Air humidity 80% exceeded at temperatures of
up to 31°C Electronic and mechanical components
can become damaged.
Performance data may change to an
unknown extent.
Electrical Connection Mains system does not agree with
the levels on the type plate Electronic components can become
damaged.
Cleaning Disconnect mains plug before every
cleaning process. Risk of a fatal electric shock.
Do not clean with running water. Risk of a fatal electric shock.