Setting the time and continuous operation, Starting- interrupting- stopping, Opening the noise insulating hood – Retsch AS 200 tap 30.025.1001 User Manual
Page 14
![background image](/manuals/571215/14/background.png)
8 January 2008
Retsch GmbH
14
Doc. no. D 98.025.9999
Setting the time and continuous
operation
12 13 14
When the AS 200 tap is switched on, the sieving
time still has to be determined.
Two dashes - - appear in the display 13.
Increasing the time:
Button 13 increases the time up to 99 minutes.
Reducing the time:
Button 12 reduces the time down to one minute.
Continuous operation:
If the time drops below one minute, two dashes will
appear in the display. This activates continuous
operation. The same happens when the time
exceeds 99 minutes.
Starting- interrupting- stopping
15 16
Starting:
Press the START / Button 15
The green LED over button 15 lights up
Interrupting (pause function):
Press the STOP / button 16 once
The red LED over button 16 lights up
The levels remain visible
Press the START / button 15 at the same time
The sieving process continues
Stopping (stand-by function):
Press STOP / button 16 twice
The red LED over button 16 lights up
The complete display goes out
Activate the LED display by pressing button 15
once
The new levels can be entered now
Press START / button 15 a second time
The function runs as with START
Opening the noise insulating
hood
When the door is opened, the AS 200 tap turns
off automatically and does not start again until
the door is shut.