Retsch AS 200 tap 30.025.1001 - Manual (Page 7)

8 January 2008 Retsch GmbH
7
Doc. no. D 98.025.9999
Technical Data
Machine type designation: AS 200 tap
Use in accordance with the intended purpose
This device is not designed as a production machine or for
continuous operation, but as laboratory apparatus for
single-shift 8-hour operation.
The RETSCH AS 200 tap is used for dry sieving with
analytical sieves with diameters of up to 203 mm, whereby
the uniform, horizontal circular sieving motion and the
tapping pulse ensure an exact separation of the material
being sieved with a feed grain size of up to a max. 25 mm.
Fine and coarse grained materials, such as those produced
in mills, breweries, and in the chemicals, stone, earth,
wood and plastic industries can be separated exactly with
the AS 200 tap.
The horizontal, rotating movement of the material being
sieved is particularly advantageous for separating products
such as milled grain, wood chips or similar materials.
Accordingly, DIN 53477, for example, specifies a rotating
sieve motion for testing plastics (grainy moulding plastic
material).
The AS 200 tap can be used as testing equipment for
monitoring quality conformance to DIN EN ISO 9000 et
seq.
The required sieving time is digitally set, displayed and
monitored.
The AS 200 tap has an integrated interface for triggering all the
sieving parameters through the EasySieve® software. The
interface cable required for this is included in the scope of supply.
Do not make any modifications to the machine and use only
spare parts and accessories approved by Retsch.
Otherwise the Declaration of Conformity to the European
Directives declared by Retsch will lose its validity.
Furthermore you will forfeit the right to any kind of
claims under guarantee.
The movement of the sieved material in the AS 200 tap can
cause considerable unbalance. It must therefore be installed on
a suitable laboratory table. The net weight of the AS 200 tap
is 68 kg.