Retsch AS 200 tap 30.025.1001 - Manual (Page 9)

8 January 2008 Retsch GmbH
9
Doc. no. D 98.025.9999
Transport and Installation
Packaging
The packaging has been adapted to the transport route
and conforms to the generally applicable packaging
guidelines.
Please keep the packaging for the duration of the
guarantee period because returning the equipment in
unsuitable packaging if you have a complaint can
jeopardize your guarantee claims.
Transport
After unpacking, the AS 200 tap is to be lifted and transported only
with permissible lifting slings and only with the TS transport screws
supplied with the machine. Fig. 1
Net weight: AS 200 tap approx. 92 kg
Lifting above head height is not permissible!
The AS 200 tap may not be knocked, shaken or
thrown about during transport as this could damage the
electronic and mechanical components
.
Temperature fluctuations
If the AS 200 tap is subjected to a high level of
fluctuations in temperature (e.g. during shipment by
air), it must be protected from condensation in order to
prevent damage to the electronic components.
Intermediate storage
Make sure that the AS 200 tap is stored in dry conditions
even during intermediate storage.
Parameters for the place of installation
Ambient temperature :
5°C to 40°C
If the temperature drops below or exceeds the range for
ambient temperature, the electrical and mechanical
components may become damaged and performance data
may change to an unknown extent.
Air humidity:
-0-1
A
b
b
.
0
-
2
Abb. 1
TS
Fig. 1