Shown without clip & rear cover plate – RKI Instruments GX-2001 Canadian Version User Manual
Page 37
Advertising

Model GX-2001 Operator’s Manual
Maintenance • 37
6. Replace the battery. Insert the bottom first so it snaps into place, then
the top.
CAUTION: When replacing the battery, be certain to insert the bottom of
the battery (the thickest and largest part) first into the housing
of the Model GX-2001 before inserting the top. Inserting the
top of the battery first before the bottom may damage the
circuit board underneath.
7. Replace the screws, small pins, metal plate, and belt clip in reverse
order as described in steps 2 through 4 above.
Figure 8: Inserting a New Battery into the Model GX-2001
2nd: Push in Place
Gently
1st: Put in Place
Re move
Pack From
This End
Shown Without Clip & Rear Cover Plate
Advertising