RKI Instruments GX-2012 Manual - Manual (Page 56)

48 • Display Mode GX-2012 Operator’s Manual
Date/Time Screen
The date/time screen displays the current date and time with the order being
year, month, day, time.
Remaining Log Time Screen
The remaining log time screen displays the time remaining until the data
logger memory is full. The remaining log time depends on how often the GX-
2012 stores data to the data log, how many channels are active, and how often
the GX-2012 is turned on and off.
The table below illustrates how much data logging time is available for the
various interval times. It assumes that the unit is set up with all 5 sensors and
there are no alarm occurrences.
Table 6: Data Logging Capacity, 5 Sensor GX-2012
Interval
Time
Data Logging Time
10 seconds 10 hours
20 seconds 20 hours
30 seconds 30 hours
1 minute 60 hours
3 minutes 180 hours
5 minutes 300 hours
10 minutes 600 hours
2011
8
31
22:39
DATE
LOG
276
H
REMAIN