RKI Instruments GX-2012 Manual - Manual (Page 61)

GX-2012 Operator’s Manual Display Mode • 53
To change a station:
1. After entering Display Mode and proceeding to the Station ID screen,
press and hold the POWER ENTER button. The bottom line of this
screen alternates between YES/ENT., the current station ID, and NO /
DISP.
2. Use the AIRS and (SHIFT)T buttons to scroll through the 128 possible
station IDs.
3. Press the POWER ENTER button to select a station ID.
Snap Logging Screen
The Snap Logging Screen allows you to view data from previous snap
loggings. For information on how to use the snap logging feature, see “Snap
Log Mode” on page 33.
1. To view snap logging data, use the AIRS and (SHIFT)T buttons to
scroll to the Snap Logging Screen. The bottom line of this screen
alternates between REC. DATA, NO /DISP, and YES/ENT.
2. Press and release the POWER ENTER button. If no snap logs have been
performed, the following screen will appear.
S Id
001
SEL
d ISP
REC. DATA
NO DATA