RKI Instruments Beacon 100 User Manual
Page 25
Advertising
![background image](/manuals/571390/25/background.png)
Beacon 100 Gas Monitor Operator’s Manual
Instrument Setup Program • 25
•
To update the alarm type setting:
1.
Use the UP and DOWN buttons to change the current setting to the desired
setting, RISE or FALL.
2.
Press ENTER to accept the new setting and it will stop flashing. If you press
ESCAPE while the setting is still flashing, any change you may have made
will be cancelled and the original setting will be displayed.
Returning to Normal Operation
Press ESCAPE four times to return to normal operation.
Advertising