Viewing & resetting min/max readings – RKI Instruments Beacon 800 User Manual
Page 25
Beacon 800 Gas Monitor Operator’s Manual
Viewing & Resetting Min/Max Readings • 22
Viewing & Resetting Min/Max Readings
The Reset switch may be used to view and reset the minimum and maximum gas
readings for all active channels.
1.
While the Beacon 100 is in normal operation, press and hold the Reset switch button
for 3 seconds.
2.
The display will indicate MIN / MAX Display on the top display and the bottom display
will indicate Press RESET when done viewing . . . for 5 seconds before displaying
the minimum and maximum readings for all active channels. The minimum reading is
on the left and the maximum is on the right side of the display for each channel.
3.
Press and release the Reset switch button to exit the min/max screen. The top display
will indicate To RESET Min/MAX Values and the bottom display will indicate Press
and HOLD RESET Button for 10 seconds and then return to normal operation.
•
To return to normal operation without resetting the minimum and maximum read-
ings, do not press the Reset switch button and allow the unit to return to normal
operation.
•
To reset the minimum and maximum readings, before the unit returns to normal
operation press and hold the Reset switch button until the display indicates Min/
Max Values Have Been Reset. Release the Reset switch button. The unit will
then return to normal operation.