Schroth Racing All models - Competition Instructions - Manual (Page 45)

b] run webbing from outside through slots of both brackets and fold
over.
c] Run webbing back through gap between both brackets and
through slot of outer bracket.
d] Pull webbing through to adjust the proper length.
„inner“ bracket
„outer“ bracket
7. Use e.g. “Loctite 243” to secure bolt.
8. Bolt-in both and tighten. Follow all information as well as SAFETY
INSTRUCTIONS and WARNING boxes provided under section titled
“Important Information about Bolts and Torques”.
9. Make sure the brackets stay positioned in the direction of pull.
- 44 -