Schwank bistroSchwank 2-Stage - Manual (Page 15)

2100 / IO 100 Manual
IM110107
RD: MAY 2014
R.L. 4A
15
1. Install the Wall Mount Bracket to the structure using field supplied hardware. Ensure
strength and integrity of mechanical fastening to structure for the weight of the heater and
any potential snow load.
2. Install the heater bracket on the heater using four nuts.
3. Install the heater bracket to the wall mount bracket, and remove the chains from the top of
the heater.
Figure 8: HEATER INSTALLATION: WALL MOUNT BRACKET
NOTE: MOUNT AT MAXIMUM 30° ANGLE TO AVOID DAMAGING HEATER