Schwank bistroSchwank 2-Stage - Manual (Page 41)

2100 / IO 100 Manual
IM110107
RD: MAY 2014
R.L. 4A
41
22. CONTROL ACCESSORIES
JM-0201-TS Single Switch Gang Assembly:
Control from 1 to 4 Two-Stage Heaters in one Zone
JM-0202-TS Double Switch Gang Assembly:
 Control 2 to 8 Two-Stage Heaters
 2 Zones with up to 4 heaters/zone
Remote Control Options: Single-Stage Heaters only - See details pages 23 to 28
Two-Stage Illuminated Switch Gang Assemblies (24Vac capacity) :
 One or a combination of these switch gangs is required to control 2-stage heaters
NOTE: Required Switch Sequence Off-On-On is not readily available in the market
JP-1236-HS 4-Button Remote
Handset Transmitter
JP-1236-RK Remote Receiver Kit (field installed in heater)
JP-1236-KT Wireless Keypad
Transmitter
(wall mounted at patio)
JM-0203-TS Triple Switch Gang Assembly:
 Control 3 to 12 Two-Stage Heaters
 3 Zones with up to 4 heaters/zone
 Illuminated switches indicate low or high stage operation at a glance
 Each switch gang controls from 1 to 4 two-stage heaters in a zone
 Combine switch gang assemblies/sizes to achieve optimum control
 Brushed stainless steel switch plates
 Standard electrical box supplied to suit each size
 Factory wired
 Heater & switch control wiring diagrams - Pages 34 & 35
 Field supplied 120/24Vac transformer required upstream of switch gang assembly
Order items
separately