Service access – Schwank sportSchwank User Manual
Page 19
sportSchwank Manual
IM080731
RD: July 2008
RL: 01A
BA
Page 16
Broken/cracked ceramic tile and/or gasket: Replace damaged component.
Faulty sealing of the ceramic tile to the burner body, caused by breakdown of
gasket material: Replace gasket and re-seat tile.
Refer to Section 13. Troubleshooting Guide for further servicing information
Schwank Technical Service is available during regular business hours (Eastern
Time Zone) to qualified gas service technicians at 1-877-446-3727
Have available the information required in the Commissioning Report (pages
18 & 19)
15. SERVICE ACCESS
For access to the burner and controls to perform setup, maintenance, and service pro-
cedures, remove only the cotter pins at the front of the heater (2 to 4 pins). The weather
screen will rotate down, out of the way for service, cleaning and other maintenance.
FIGURE 5 - COTTER PIN REMOVAL FOR SETUP & SERVICE ACCESS
FIGURE 6 - END COVER REMOVAL FOR
SERVICE ACCESS
Gas valve replacement
FIRST - Remove lower screened panel by remov-
ing 3 end screws, plus bottom screw.
Then remove upper end panel - extract 3 screws