Regency Horizon HZ54E Large Gas Fireplace - Manual (Page 41)

Regency Horizon HZ54E-1 Gas Fireplace
41
INSTALLATION
12) Program Receiver and transmitter (refer to manual)
Note: DO NOT USE 4 AA batteries in the battery pack on the tray; the
DFBC is now powered by the receiver batteries in the wall.
11) Connect GTM motor wire from the stepper motor to the wire connector
from the receiver wire harness.
9) Install 4 - AA batteries into the receiver, ensure correct polarity.
10) Plug receiver wires into the back of the receiver and bundle wires
with the wire clip as shown below.
Wire Clip