Barco R9001330 - Manual (Page 108)

Service Mode
5975288 BARCOGRAPHICS 8200 110497 13-13
Service Mode
5975288 BARCOGRAPHICS 8200 110497 13-13
Panel Adjustments
Changing these settings may seriously affect the performance
of the projector.
All panel adjustments are factory adjusted. If not really necessary, do
not touch one of these adjustments. They are useful when a new
panel is installed.
Highlight Panel Adjustments by pushing the control disk up or down
and press
ENTER
When Panel Adjustments is selected in the Service Mode selection
menu, the following warning will be displayed :
Risk of electrical shock. Panel Adjustments is reserved to qualified
service personnel.
If you are not qualified, press
EXIT to cancel the panel adjustments.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
60Hz TRACKING
I2C DIAGNOSIS
MORE...
WARNING
PANEL ADJUSTMENT
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Panel Adjustments
Changing these settings may seriously affect the performance
of the projector.
All panel adjustments are factory adjusted. If not really necessary, do
not touch one of these adjustments. They are useful when a new
panel is installed.
Highlight Panel Adjustments by pushing the control disk up or down
and press
ENTER
When Panel Adjustments is selected in the Service Mode selection
menu, the following warning will be displayed :
Risk of electrical shock. Panel Adjustments is reserved to qualified
service personnel.
If you are not qualified, press
EXIT to cancel the panel adjustments.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
60Hz TRACKING
I2C DIAGNOSIS
MORE...
WARNING
PANEL ADJUSTMENT
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.