Barco R9001330 - Manual (Page 39)

Power Connection
6-2
Power Connection
5975288 BARCOGRAPHICS 8200 110497
5975288 BARCOGRAPHICS 8200 110497 6-2
Power (mains) cord connection
DECODER MAC-INPUT VIDEO-INPUT
VIDEO S-VIDEO
VGA-INPUT
RS 232 IN REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY COMMUNICATION PORT
(800-PERIPHERALS)
100-240Vac
10-4.5A
VIDEO S-VIDEO
Use the supplied power cord to connect your projector to the wall
outlet. Plug the female power connector into the male connector at
the front of the projector.
The power input is auto-ranging from 100 to 240 VAC.
This projector may be connected to an IT-power system.
Fuses
Warning
For continued protection against fire hazard :
- replace with the same type of fuse.
- refer replacement to qualified service personnel
Fuse type : T12.5 AH/250V
Switching on
Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.
Power (mains) cord connection
DECODER MAC-INPUT VIDEO-INPUT
VIDEO S-VIDEO
VGA-INPUT
RS 232 IN REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY COMMUNICATION PORT
(800-PERIPHERALS)
100-240Vac
10-4.5A
VIDEO S-VIDEO
Use the supplied power cord to connect your projector to the wall
outlet. Plug the female power connector into the male connector at
the front of the projector.
The power input is auto-ranging from 100 to 240 VAC.
This projector may be connected to an IT-power system.
Fuses
Warning
For continued protection against fire hazard :
- replace with the same type of fuse.
- refer replacement to qualified service personnel
Fuse type : T12.5 AH/250V
Switching on
Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.